Inergen system design manual

receive detection and INERGEN® iFLOW system protection. Contractor is to review all drawings so that all items affecting the operation of the fire detection/INERGEN® iFLOW fire suppression system (such as equipment location, air diffusers, damper closures, and door openings) are considered in the design of the engineered system. D. – The INERGEN iFLOW system must be designed and installed within the guidelines of the manufacturer’s design, installation, operation, inspection, recharge, and maintenance manual. The ambient operating temperature limitations are: 20 °C to 54 °C (-4 °F to °F). Technical Data. Applicable Standards – The INERGEN iFLOW system complies. The systems use a pressure reducing device at the outlet of the cylinder manifold to drop the high manifold pressure to approximately pounds per square inch. During an INERGEN discharge there are very rapid pressure changes both in the cylinder and in the pipe line. Figure 1 is a diagram of a basic inert gas distribution system. The system.

inerting capabilities. Those tests have shown that INERGEN agent, at design concentrations between 40% and 50%, has successfully inerted mixtures of propane/air, and methane/air. The system can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. INERGEN is an effective fire extinguishing agent that can be used on many types of fires. INERGEN extinguishing system units are designed for total flooding protection against Class A surface burning, Class B flammable liquid, and Class C fires occurring within an enclosure by lowering the oxygen content below the level that supports combustion. - The INERGEN iFLOW system must be designed and installed within the guidelines of the manufacturer's design, installation, operation, inspection, recharge, and maintenance manual. The ambient operating temperature limitations are: 20 °C to 54 °C (-4 °F to °F). Technical Data. Applicable Standards - The INERGEN iFLOW system complies.

INERGEN is a blend of Nitrogen, Argon and CO 2. It is recognised INERGEN is that it is safe for people. that the CO 2 in INERGEN provides a specific safety advantage compared to other inert gases. The UK's Halon Alternatives Group specifically assessed safe use criteria of clean agents and identifies INERGEN, due to the CO 2 as. System Components UL EX Page REV. 3 Description Electrical actuation of a CV INERGEN® valve is accom-plished by a CV electric actuator interfaced through an AUTOPULSE Control System. This actuator can be used in hazardous environments where the ambient temperature range is between 32 °F to °F (0 °C to 54 °C). A system installation and maintenance manual is available containing information on system components and procedures concerning design, operation, inspection, maintenance, and recharge. The system is installed and serviced by authorized distributors that are trained by the manufacturer. Basic Use – The INERGEN system is particularly useful for.